Kelly Casanova Weaving Lessons

mirrixlooms

Hand Woven Tapestry Necklace

by 8 Comments

I completed 4 towels on my floor loom for the April #weaveforme challenge, but considering they were for a class as well, I did feel like I had cheated just a little.

*This post contains some affiliate links, which means that if you click and purchase, I receive a small commission at no extra cost to you.

So, I decided that I needed another project that was exclusively for me. I’ve been keen to start another project on my tapestry loom and thought it could be fun to weave a necklace or two. This is entirely different from my usual, often very practical projects.

I had a few hiccups to begin with. I wanted to use up some Appleton’s Crewel Embroidery Wool in a lovely range of colours that I had leftover from a crewel project long ago. This is a very thin and light wool.

I warped at 18epi with the same Ashford Tapestry Warp thread I have been using for all my tapestry work. Warping all went according to plan and I was ready to weave.

When I started weaving, however, I did not like what I saw! The wool is so thin that even though I beat down very hard, the warp thread still showed. It looked ugly! Now I had to put my thinking cap on and make some decisions. If I used a thicker weft, I was concerned that the 18epi would end up being too close. I wondered if I would be able to change the spring at the top of the loom that spaces the warp, in order to change the epi.

The Appleton wool. This was after beating really hard!

I loosened off the tension and went for it. I took off the 18epi spring and placed a 12epi spring on instead. Then I carefully rearranged all of those warp threads into their new spaces. This presented me with a new problem. My warp, now that the threads were space further apart was way too wide for the necklace project I wanted to weave!

Out came the thinking cap again (it received more use than normal on this particular day). I found that if I divided the warp in half, that would be just the right width for a necklace. Plus, that would allow me to weave 2 necklace panels simultaneously. Bingo!

The warp divided in half.

On one panel (left in the photo above) I used hatching with 2 contrasting wools – one solid black and the other a hand dyed variegated of similar weights.

The second panel used a worsted weight wool in dark purple and the same hand dyed as the other. The purple yarn was quite a bit heavier than the hand dyed, I dealt with that problem by doing extra rows on the middle panel to build it up at the same rate as the dark purple. These rectangular shapes are not joined, I used this technique because I wanted clean lines.

I was able to weave both panels at once, which worked out really well. My original intention was to continue to weave additional panels for extra necklaces, but I really wanted to complete the April challenge before too much of May had passed, plus I had other projects mounting up that needed to be started, so I decided to finish up and just do the two.

Finishing the fringes and making into a necklace.

I decided to use hemstitching and a tapestry braiding finish (I’ll have a video tutorial for that soon) to finish the fringes. At the bottom of the hemstitched hatched panel, I wove the fringe back into the work. I took the fringe at the top, placed my faux leather necklace on top, and began weaving the fringes individually back into the work, looping the fringe threads around and encasing the necklace band as I went.

I wasn’t sure if this would secure the panel onto the band with enough strength, but now that I’m finished it is surprisingly hardy and doesn’t move.

The fringe looped over the necklace and woven back in to the fabric.


Once all the fringes were woven in securely, I snipped them off close to the fabric. The back of the necklace doesn’t show, but if I was worried about it, I could have sewn on a piece of felt the same size as the panel to cover the back.

I have not yet finished the other panel, but I’m so glad to have completed another project for the April #weaveforme challenge. The challenge was so popular that I would love to run it again next year. What do you think?

If you would prefer to watch this post and see a bit of a demonstration of the actual weaving, here you go!

And, if you have an interest in learning more about tapestry weaving on a rigid heddle loom, I have a class that will teach you all the basics and get you on your way.

I hope you all enjoyed following along with this project and reading and watching about it.

Until next time…

Happy Weaving!

Interview with Mirrix Looms

by 7 Comments

I was thrilled to have the opportunity to interview Claudia Chase, President of Mirrix Looms. You may be aware that I am quite taken by the tapestry looms available from Mirrix and have one on my Wishlist, as I discussed in this post.


                                              Photo credit Williams-Prior Art + Design


When did you first become interested in weaving? How did you learn? What attracted you to it?

I became interested in weaving when I was nine or ten. I saw a rigid heddle loom in the home goods department of Macy’s! My parents bought it for me for Christmas. I was hooked. But that was cloth weaving and it would take me many years to realize my passion was actually tapestry weaving. That happened when I was pregnant with my daughter Elena. There was a tapestry course being offered in San Francisco, CA (United States) where I was living at the time. The class seemed more like a gathering of women who wanted to weave together and not a lot of instruction seemed to be happening. They were also doing some natural dyeing and it struck me that although the onion skins were cool maybe the heavy metal they were using to fix it was not the best thing for my pregnant self. I attended two classes. I learned only one thing: I loved tapestry and I was going to master it on my own. 


When did you decide to start a business and how did you settle on a name?

I designed the loom with a friend because I wanted a high-end very portable metal tapestry loom. A metal loom existed called the Hagen but the smallest size was 24 inches and I wanted something really small that I could throw in a bag and haul wherever I might go. I didn’t want to miss any opportunity to get in a few weft passes. I also wanted a loom with a more sophisticated shedding device along with excellent tension. Our prototype was ten inches wide. Sometimes life just happens and the next thing I knew I  was in business manufacturing portable metal looms. The name came from the joining of a Greek and Italian verb to mirror or to wonder. I just added “ix” at the end and Mirrix was born!


                                            Photo credit Williams-Prior Art + Design

Mirrix looms are quite unique in design and aesthetics. What influenced your decisions on materials and style for your looms?

I wanted to use metal because it is much stronger than wood and one of the biggest failures for small wooden tapestry looms is they cannot withstand the stress of tension and in any case most of them don’t even have a tensioning device. There were a couple of other metal tapestry looms out there and folks were making their own out of copper pipes. I wanted a loom with an easy to use shedding device, perfect tension and portability. We took some old ideas and some new ideas and came up with what we think is the perfect portable tapestry and bead loom.
How many looms do you personally own and which is your favourite?

There are fourteen looms in my studio at this very moment with various stages of tapestries on them. I am always experimenting for new kits, new products and new ways to weave so I need a lot of looms. My favorite size changes over time. For a while I was weaving tiny tapestries on the 5 inch loom. I guess I was looking for intimacy. Currently I am working with all the smaller looms. But I have a lovely piece temporarily in repose on a twenty-two inch loom, which at times has been my favorite size for tapestry. It’s small enough to easily move from space to space and it’s large enough to make a rather substantial tapestry. In the past I have stated that if I could have only one Mirrix Loom it would most likely be the 22 inch loom. But then again, I really do love those smaller looms that peopled my original vision. I would also want one of the smaller looms. Gosh, deciding which one would be quite the dilemma. There is a reason why folks collect multiple Mirrix Looms!

What are your favourite fibre/threads to use and why?

I use wool and silk almost exclusively. I am fascinated with weaving with our hand-painted silk yarn and ribbon. Combining it with wool is magical. For warp I use wool, linen and cotton depending on the project. For about ten years I dyed fleece and the spun it in to yarn. I do hope to get back to that someday because it made my tapestries totally mine.

What items do you love to weave the most?

Lately, I’ve been obsessed with working on smaller pieces. They are little, tiny comments on life and happen quickly so I can move through one a day. In the past I have woven large pieces which take weeks or months to complete. That requires an entirely different mind set. I find lately that I find myself more attracted to the smaller pieces because I can move through a design or color problem much more quickly with small format. I know I will be ready to go back and do a large piece very soon. 

What did you do before your weaving business?

                                         Photo credit Williams-Prior Art + Design

I wove tapestry before I began the loom business. Before that I wrote and published poetry and worked as an editor. I had founded a poetry magazine back in the day. My interests range from verbal to visual. I believe I have a healthy dose of ability in each.

I love that your looms are manufactured local to you and at Sunshine House. Can you tell us a little about Sunshine House and how this wonderful collaboration came to be?

Sunshine House provides supported employment for people with physical and mental disabilities. Making a loom is a complex process and the managers there do a fantastic job matching tasks to people’s abilities and setting up work stations to help people with different abilities be successful. It’s a wonderful place and allows people who may not be able to get employment elsewhere to work and to be a part of something truly good. 

What are your plans for the future of your business?

We want to continue doing what we’ve been doing all along. We have created a rhythm for doing business whether it’s finding a new audience to developing new looms, accessories and projects. It’s careful and determined. We don’t rush into anything because we want to make sure we are always taking Mirrix in the right direction. Thus far, we have been so lucky with our choices. We do have a new product on the horizon which will allow lightening quick warping of the Mirrix which will both accommodate new weavers but also assist seasoned weavers who want to instantly throw on a warp for sampling or otherwise. We have been working on this new accessory for a year now. It has just survived market testing with flying colors so we are ready to launch!

What advice would you give to someone who is interested in learning weaving?

Start slowly. Sometimes people get into their heads that they want to weave something very complex or very specific and they get frustrated when their skill level doesn’t match their expectations. Weaving is a skill that can take many years to develop. Don’t put too much pressure on yourself and start with the basics and you’ll be way more successful. Giving yourself a strong foundation of weaving skills is very important! 

Thanks to the Mirrix team for a marvellous insight into your looms and business!

I wanted to add that another thing that really appeals to me about the company is all of the excellent instructions and tutorials you can access on their blog and Youtube. These are people who really want you to succeed in your weaving and I just love that.

To find out more about Mirrix, you can visit them at the following places: